Easily fill the pores of the wood, with the NitorLACK pore filler

The first step to a flawless paint job

The NitorLACK Pore Filler is a product designed to fill the pores of the wood and prepare the surface for painting and to make it look as professional as possible. The product is compatible with our water-based dyes to give it the desired shade. The thickness can be adjusted with water, it is easy to apply, dries quickly, does not crack and is easy to sand. Works especially well in large open-pored woods such as mahogany, ash or rosewood.

This product is the best option to fill and level wood pores before painting

• Everything for a professional finish.
• Fill wood pores without sagging, shrinking or cracking
• Compatible with all finishes
• Compatible with all stains, substrates and topcoats.
• Colors specially developed for instruments.
• Neutral is perfect for custom shades with dyes and pigments
• Easy to apply, dries quickly and sands easily
• Non-toxic, solvent-free and non-flammable.
• Ready to mix with water (a 1:2 ratio of water to fill works for us). Apply to wood, scrape or
• Sand off the excess, allow to dry, sand flat and wipe with a damp cloth. It is easy! Now you are ready to spray a smooth, flawless professional finish.

You don't have to worry about shelf life - when stored dry, the filler will last indefinitely.

PREPARATION

Put the filler in a glass in the water with about 10% warm water. Blend until smooth and to a suitable consistency to apply.

REMARKS

• If a subsequent application of the pore filler is necessary, allow it to dry for 30 minutes
• The color of the product can be toned down with our water-based dyes.
• Wait 24 hours after filling to continue applying the finish.
• It is non-toxic.
• With the guarantee of Valresa Coatings S.A